This Lepai Tripath-based mini audio amplifier is ideal for both home and car audio applications. The amplifier's TA2020 amp chip is a 20W/ch continuous average two-channel Class-T Digital Audio Power Amplifier IC that incorporates Tripath's proprietary Digital Power Processing technology. Class-T amplifiers offer the audio fidelity of Class-AB amps combined with the power efficiency of Class-D amplifiers. The Lepai amp's clean, 20 watt output makes it perfect for most any auto or home audio project or DIY application. Google Lepai TA2020 and you'll find this little amp has been discussed and raved about! Each unit has an RCA Left and Right channel input, or you can use the 3.5 mm stereo input jack for plugging in almost any music source, such as iPods, cell phones, or MP3 players. Convenient spring terminals make connections to your speakers quick and easy! The Lepai mini amplifier has an aluminum enclosure that is lightweight, yet sturdy, and acts as a heat sink to keep the amp running cool. Color may vary.Includes 12V, 2A power supply. Specifications: Power output: 2 x 20 watts RMS ; Input impedance: 47k ohms ; Frequency response: 20 Hz - 20 kHz ; Input sensitivity: 200 mV ; Minimum THD:
The E3 Portable Headphone Amplifier from Fiio is a compact and portable headphone amplifier that allows you to increase the play time of your music player and improve the audio quality. It also has a bass boost function for enhanced bass. The amplifier has standard 3.5mm input and output connectors, providing compatibility with a variety of headphones and music players. Simply place the amplifier in the signal path between your music player and your headphones.Features: Signal to Noise Ratio - 90 dB (A Weight) Distortion - 0.05% (10 mW) Frequency Response - 10 Hz - 40 kHz Suitable Headphone Impedance - 16 ohms - 300 ohms Dimensions - 2 x 0.9 x 0.57 inches Weight - 11g (Battery not included)
The E11 Headphone Amplifier from Fiio is a compact and lightweight headphone amplifier that offers high-quality audio, ideal for portable music devices. The amplifier has standard 3.5mm input and output connectors for compatibility with a variety of MP3 players, CD players, computers, earbuds, headphones, and other devices. It has a heavy-current 3-channel amplified circuit that lowers output impedance. It also provides high efficiency and a low-noise power boost. It provides precise and even sound pressure levels and a wide dynamic range. The convenient volume control uses a closed APLS potentiometer to ensure low noise and excellent channel balance. The amplifier offers 3 levels of bass boost and 2 levels of gain to meet your personal preferences and adapt to different sound sources. There are also high and low voltage options to meet different needs. An auto-lock protective circuit will turn the amplifier off automatically in the event of abnormal activity in order to protect your headphones and minimize the risk of hearing damage. The amplifier operates on a high-performance BL-5B Lithium battery that is easily replaceable. The battery provides approximately 10 hours of operation per charge, allowing you to listen all day. The amplifier has charging and power indicator LEDs to give you a visual cue of operation status. A charge priority function will cease operation while the amplifier is charging. Once the battery has been charged and the amplifier is unplugged, operation resumes.
FiiO E11 Portable Headphone Amplifier With Micca Accessory Pack (Wall Charger and Extra Battery Pack)
The attractive case on the FiiO E11 is the just the first clue that this headphone amp is special. Look deeper, and you'll see some surprising features. The innovative volume control wheel is attached to a Japanese ALPS potentiometer. There's three separate EQ settings and two selectable gain levels to tailor the sound output to any taste and a protection circuit that kicks in to protect your headphones (and your ears) from unexpected problems with the signal. You might expect these sorts of features on an expensive desktop headphone amp, but this affordable and versatile performer is very portable. The internal Li-ion battery, charged via mini-USB port, is user-replaceable, ensuring the E11 won't be easily sidelined. The 3.5 mm stereo input and output on the amp will work with all popular mobile devices and earbuds. FiiO even thoughtfully includes rubber straps to keep the E11 and your music player or mobile phone banded together.
Genuine State-of-the-art Headphone Amp Don't be fooled by its plain vanilla chassis. The unassuming-appearing Musical Fidelity V-CAN is a genuine state-of-the-art headphone amplifier. Most high quality headphones have impedance of around 30 Ohms. Yet almost all headphone amps have an output impedance between 50 and 100 ohms. Because of their high output impedance, these other amps cannot drive headphones properly. Any sound they produce through the headphones is necessarily colored by distortion and nonlinear frequency response. The V-CAN is quite different. Its output impedance is 5 ohms. This means it will drive any headphone available with ease. It will produce low distortion, ruler flat frequency response, and complete linearity. V-Series Components The V-LPS is part of Musical Fidelity's V-Series of components. The V-Series is a new, ultra-value, super-performance series, which offers incredible value for money. As a result of careful engineering, the V-Series has state-of-the-art, no compromise circuitry housed in a nicely finished but modest package. Typically, the V-Series has 60% to 70% of its cost in electronics. The quantity and quality of components in any of the V-Series is pretty well identical to those from high-end components costing ten times (or more) the price. The difference is that the V-Series is housed in nicely finished, economical metalwork as opposed to the kind of chassis that Musical Fidelity calls "bloated high-end excess."
Add the magic of tubes to the sound of your music Plug the HiFiMAN EF2A into one of your computer's USB ports and prepare to be impressed. This compact digital-to-analog converter/headphone amp bypasses your computer's built-in DAC and audio circuitry - processing your digital music files outside the noisy environment of your computer for far better sound quality. The EF2A's vacuum tube headphone amplifier brings your tunes to life, imparting smoothness and clarity. You'll hear more dynamics and detail that you can really savor on your headphones. The EF2A also includes an analog audio input so you can enjoy improvements in sound with another music source. This is one component that looks so cool, you'll absolutely want to show it off on your desktop.
This is just the coolest studio headphone amp we have ever seen, or heard. The C-Que 8 is the first of a series of very professional and very versatile C-Class studio tools from Samson. The C-Que 8 packs four channels of super clean headphone power into a half rack space chassis with locking end caps for stacking. Each channel has two headphone outputs, a volume control, LED output meters, and an EQ shape circuit. The C-Que 8 also features XLR and 1/4” TRS inputs, a master volume control, 2-channel or stereo mode switches with balance control, and a link connection to daisy chain additional units. The perfect compact headphone amp. Further enhancing your control in the studio is this Four Channel Headphone Amplifier with eight outputs. Independent volume on each channel makes this a truly versatile headphone amplifier. A 6-segment LED indictor shows the output for each channel. There's a main volume for overall level adjustment. An EQ shape circuit offers tone control of each channel and listeners can manage their own personalized mixes. Link outputs allow more than one C-que 8 to be used when needed.
The A 1 headphone amplifier has been developed to operate headphones with nominal impedance from 30 to 600 ohms. It provides excellent audio quality with high volume and strong bass response. The special circuit design features an amazingly natural sound reproduction with an excellent resolution and spatiality. The entire circuitry is capable to transmit 96 kHz allowing the transmission of the whole frequency response of a SA-CD or DVD audio. Due to a microprocessor-controlled relay, two high-class stereo sound sources can be selected silently. The volume control is made of solid aluminum with a high-grade ALPS potentiometer inside. The gold-plated RCA connections on the rear allow the connection of audio sources and provide a signal transmission without loss. A large dimensioned toroidal core transformer ensures high fidelity of impulse and dynamics. The combination of selected high-grade components allows even the highest-impedance headphones to be driven flawlessly over the entire frequency range. High impedance at the headphones output ensures the control range of the volume potentiometer to be perfect for low-impedance headphones, too. One input is passively connected with the Lineout of the A 1 to loop through incoming signals even when the A 1 is in stand-by mode. Two blue LEDs on the front display the active signal input, another multicolor LED shows the operating status (stand-by or active).
Operating from a technology platform that has won NuForce numerous awards and rave reviews, NuForce?s Second-Generation Icon is an audiophile-quality integrated desktop audio amplifier featuring two 24-watt outputs, a 3.5mm stereo input for connecting to an iPod or similar portable device, a USB port for operation with a PC or Mac, and standard RCA inputs for employing the Icon as the heart of a conventional audio system. For the headphone enthusiast, the Icon also features a high-performance headphone output. Of particular interest to the computer user, the Icon?s line-out functions as a PC or MAC USB-to-analog audio converter. This feature also operates as the connection to a subwoofer.
The new PHA40 from Pyle answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The PHA40 features four headphone outputs on the front panel giving you an extremely powerful monitoring solution at an amazingly low price. Use it at the studio, for mixing, for practicing with your bandmates -- or for simply listening to audio without disturbing others. With the PHA40 you can watch movies, practice with your band, or do any other group activity in solitude.
FiiO E6 is a Portable Headphone Amplifier designed to improve the sound quality and volume of any portable audio source such as MP3 players, iPods, personal media players, mobile phones, laptops, notebooks/netbooks, or portable CD players. It is an upgraded model of the popular E5 Headphone amplifier. The E6 retains all of the advantages of the E5 while adding new features and a substantial boost in performance, all inside a very small and stylish case. With built-in volume controls, the E6 can be used with the line-level output of audio sources for even better sound quality.Compared with the E5, the E6 offers higher gain, additional bass boost levels, input sensitivity adjustment to handle "hot" source signals, and a lock switch to prevent unintended button presses. As a result, the E6 provides superior sound qualilty and works even better with high impedance headphones. Three EQ profiles are available for flat and two bass-boost levels, allowing additional flexibility in obtaining optimal tonal match with different headphones.Key Features and Benefits:Robust design handles high impedance and low sensitivity headphones.Easy to carry and use both indoors and outdoors - Increases music player's battery life.Enhanced amplifier design with high S/N and low distortion.Very high PSRR for superior supply noise rejection. Electronic volume control for ultra low noise.Three EQ profiles: flat, bass boost 1, and bass boost 2.Built-in rechargeable battery provides up to 10 hours of normal use. Mini USB charger port can be used with any USB power source.Replaceable clip attaches to clothing, bags, and etc.Specifications: Output Power: 150mW (16Ohm), 16mW (300Ohm).SNR: >=95dB (A weighted).Distortion:
BEHRINGER MICROMON MA400 Ultra-Compact Monitor Headphone Amplifier Ultra-compact monitor headphone amplifier for studio and stage applications Personal ''more me'' mixer - mix a mic plus a monitor signal and hear them via headphones Flexible Mic In and Mic Through connectors plus Ground Lift switch Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch High-power headphone output on 1/4'' and 1/8'' jack connectors DC 12 Vadapter included High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany The ultra-compact MICROMON MA400 is the ideal personal monitor mixer for the performer who always asks for "more me." Connections The MA400 features XLR THRU jacks and provides superb noise-free operation. Just connect your mic to the MIC INPUT and send a line from the MIC THRU to your main mixer. You can even use studio-grade condenser mics, as the MA400 will pass +48 V phantom power, if your mixer is so equipped. The PHONES jacks accept both 1/4" and 1/8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in-ear-monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a 12 V DC power supply and an LED to indicate when it is powered up. Masterful Monitor Mixing Capable of stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, a microphone and the monitor feed from your main mixer. Simply adjust the MON LEVEL control to a comfortable setting and then dial in all the "me" you want with the MIC LEVEL control. Small and Superb The MA400 is an ideal solution for the "more me" syndrome. Small enough to fit in your pocket - with a price tag to match - check out the MICROMON MA400 at your BEHRINGER dealer today.
The ART HeadAMP is an 8 output (4-channel) stereo headphone amp designed for use in home, project or professional studios. If you want more control over your own levels this is the tool for you. Whatever the application, it will come in very handy. ART HeadAMP4 Headphone Amplifier Features 4 Output Channels Each with Individual Volume Control Stereo 1/4-inch and 1/8-inch Inputs (Wired Parallel) Can be Connected to Any Line-Level Source or Headphone Output Four Stereo 1/4-inch and Four 1/8-inch Headphone Outputs Power "On" LED The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case. Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source. Individual level controls for the four headphone outs, 1/4-inch and now 1/8-inch (stereo minijack) connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above.
iSport Immersion: The Athlete's Headphone by Monster For those serious about their game or their workout, Monster delivers the ultimate high-performance sport headphone. iSport Immersion was designed to meet the specific demands of today's top athletes. It's rugged, sweatproof and totally machine washable. The Pro Sound Isolating Eartips ensure an impenetrable seal blocking out water and leaving in that deep, pulse-pounding sound. Whether you're running, biking, or snowboarding, you'll go further and never lose focus, thanks to iSport's revolutionary in-ear SportClip design. Secure and comfortable, it won't fall out or get in the way of your goggles, glasses or helmet. If music is what moves you, iSport Immersion is the ultimate motivator. Its advanced in-ear speaker and MicroStrand Conductors turn your tunes into pure audio adrenaline. Powerful, clear and full of detail, you're in the zone. Go ahead and dominate. Advanced In-Ear Speaker Design with OmniTip™ Delivers true Monster-quality sound while the OmniTip™ swivel nozzle and patented SportClip provide a no-fail fit worthy of your toughest workout. Proprietary Waterproof Sealed Housing Beach. Mountains. Take your iSport headphones anywhere including the laundry room. It's washable! MicroStrand Conductors Listen to your tunes reproduced in dramatic detail. With iSport, you'll go the distance without ever missing a beat. Magnetic Flux Tube™ Technology The same technology found in Monster's best speaker cables are now in the ultimate sports headphone. 24K Gold-Plated Contacts Attractive and anti-corrosive for maximum audio signal. From now on, your favorite tracks will sound as good as gold. Convenient Right Angle Jack Move freely with your tangle-resistant cord and jack safely out of the way. Protective Clasp Pouch Tuck away your earphones when finished and carry them easily. Pro Sound Isolating Eartips Multiple sizes and shapes for the perfect fit blocking out sweat and noise so you can always focus on winning. ControlTalk™ On-Cable Mic Take the call without stopping iSport comes with convenient, hands-free calling for your iPhone or smartphone. What's in the box: - iSport Immersion headphones - 4 pairs of multiple-sized SportClips and Eartips - Protective spring-clasp pouch- Manufacturer's 1-year limited warranty *Remote and mic supported by iPod® Nano (4th/5th gen), Classic (120GB), Touch (2nd gen), iPhone™ 3GS and newer, but not all Blackberry™. Remote supported by iPod Shuffle (3rd gen). Requires software v. 1.0.3 for iPod Nano (4th gen), 2.0.1 for Classic (120GB), and 2.2 or later for Touch (2nd gen). Support for Blackberry varies by model. Subject to change. Find complete music phone compatibility: ControlTalk Compatibility for MP3 Players/iPhones
If you listen to music on headphones via a computer, iPad, Surface tablet or a Samsung Galaxy S ll or lll phone and want better sound quality then HRT's HeadStreamer Mobile is the perfect solution. Technically, HeadStreamer Mobile is a USB-connected and powered dedicated headphone amplifier/sound card designed to seamlessly interface with PC, Linux, and Macintosh computers, iPads (1, 2 & 3), Microsoft Surface tablet and the Samsung Galaxy S ll and lll phones. It directly decodes the digital music data stream from the computer, tablet or phone's hard drive into analog music for headphone listening. Like other HRT products, set up and operation is super-easy: just use the included USB cable to hook the USB input of the HeadStreamer Mobile into any available USB port on the host computer*. The HeadStreamer Mobile automatically performs an "electronic handshake" with the source device and tells it that the HeadStreamer Mobile is here, that it is to get all audio signals sent to it instead of the Digital-to-Analog converter (DAC) that is built into the computer, tablet or phone... And that's it, the HeadStreamer Mobile, is in charge of all data-transfer timing instructions. Then just plug your headphones into the 1/8" analog output jack on HeadStreamer Mobile. Now you are ready to stream some music, either directly by playing a disc through the computers optical drive, or read as a digital file from your computer, tablet or phone's hard drive. You will literally never need a stand-alone CD player again to enjoy all the music in your CD collection in high quality sound through headphones. If you happen to have other higher-resolution files (up to 24bit/96k) stored on your HD, you can also play them in their full native resolution (no up-sampling).
The Icon do delivers audiophile-grade CD quality sound to Digital music files stored on Apple® mobile Digital devices. do is ideal for music enthusiasts and musicians alike who primarily listen to—and have their Digital music libraries stored on—these devices. Icon do also offers a built-in headphone amplifier capable of powering power-hungry headsets, giving users a total audio experience. By properly powering headphones, Icon do enhances the auditory performance of the headphones because optimal amperage is being delivered to them, allowing for greater audio clarity.
Standard MINI USB Interface - connect with PC to make digital audio transfer possible and make battery charge possible3.5mm two-channel Headphone Output - suitable for various headphones with 16O~300O3.5mm SPDIF input connector - connect with high-definition player and receive PCM signal3.5mm Line In interface - connect with audio output LO&PO of audio players.18 Pin multifunctional interface - to make audio and data transfer possible in conjunction with L7 and E9.
Volume Potentiometer, Barrier Free Design, Easy To Operate. Volume Digital Indicator, More IntuitiveBass Boost, OFF:0dB;ON:+3dB, Built-In Bass Boosting Circuit, It's Different With Traditional Software To Set The EQ, The Effect Of E10 Will Be BetterUSB Digital Audio Converter To Coaxial Digital Audio Output; Line Output, Fixed Level Audio Line Output with Full ScaleSupport To Install Automatically Without Any Driver, Maximum Output :96K/24BitAll- Aluminum Shell, Enhanced Anti-Interference Ability, Thus It's More Reliable And Durable